當前位置:1566范文網 > 公司范文 > 崗位職責 > 工程崗位職責

電源設計工程師崗位職責(五篇)

發布時間:2024-11-29 查看人數:96

電源設計工程師崗位職責

第1篇 電源設計工程師崗位職責

電源設計工程師 1.負責筆記本電腦的電源回路設計;

2.根據產品設計要求,設計相應的電源解決方案;

3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;

4.制定合理的時間進程表,分配測試項目,檢查報告;

5.參與電源設計測試,解決測試中出現的問題,優化測試流程。

電子相關專業本科及以上學歷

三年以上電源相關設計經驗

1:14薪,薪資面議,加班補貼:工作日晚上1.5倍、周末2倍、法定假日3倍工資,已半小時為單位:

2:在市區及下沙公司周邊地區共設有十幾條班車線路,交通便捷

3:公司五險一金正常繳納,每年免費體檢,免費食堂,不定期旅游活動

4:設立員工活動室,內設運動設施、舞蹈室、休閑閱覽室等。 1.負責筆記本電腦的電源回路設計;

2.根據產品設計要求,設計相應的電源解決方案;

3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;

4.制定合理的時間進程表,分配測試項目,檢查報告;

5.參與電源設計測試,解決測試中出現的問題,優化測試流程。

電子相關專業本科及以上學歷

三年以上電源相關設計經驗

第2篇 seniordesignengineer高級電源設計工程師崗位職責職位要求

職責描述:

requirement:

1. bachelor degree in engineering ,electronics,or equivalent;

2. 10 years design working experience in related field / applicants in power supplies,driver or a similar company;

3. solid skills in analogue power/driver electronics design;

4. solid electronic component knowledge;

5. familiar with process design, line setup, process improvement, doe, fmea, autocad, solidwork, microsoft office

6. must be able to read, write and communicate in english (minimum passed cet level 4).

7.good problem solving skill,positive and aggressive.

job responsibility

1.product design and management until the time it goes to mass production;

2.technical support and transitioning new product platforms from erp-us d2&d team to production;

3.production and sales technical support for any sample request or product inquiry;

4. perform detailed electrical & magnetics design and cost analysis of each project to meet product requirement and cost;

5. perform detailed root cause and failure analysis within a short period of time;

6. provide solution to electromagnetic compatibility, electro magnetic interference, acoustic, dimming and safety requirement;

7. design and develop high efficient and high power density led power supply from prototype to production;

8. perform detailed test and verification to ensure product compliance versus the requirement;

9. provide detailed information to pcb and mechanical engineer to come up with the right solution for layout and overall product packaging;

10. other duties assigned by the rd management.

崗位要求:

學歷要求:本科

語言要求:不限

年齡要求:不限

工作年限:5-10年

第3篇 高級電源設計工程師崗位職責

高級電源設計工程師 高級電源設計工程師 sr. electronics design engineer

job responsibilities:

1.lead npd project development independently and collaborate with shared functions to drive for project success;

2.monitor/supervise/report project status and progress per cost, performance and schedule target;

3.follow up company process and procedure in npd stage in order to release a design to production;

4.support rfq/rfi per sales and fae requests;

5.train/coach/mentor junior technical guys in project development;

6.support innovation initiatives and involve to research and platform project.

job requirements:

1.bachelor degree or above, major in power electronics or related;

2.expertise in psu electronic design including topology, control, key component selection, calculation and simulation, design verification, cost control, dfx, safety etc.;

3.familiar with power design simulation cad tools. strong individual contributor to drive for project success independently;

4.6+ years in power design experience. 英語能讀寫,對口語沒有要求 高級電源設計工程師 sr. electronics design engineer

job responsibilities:

1.lead npd project development independently and collaborate with shared functions to drive for project success;

2.monitor/supervise/report project status and progress per cost, performance and schedule target;

3.follow up company process and procedure in npd stage in order to release a design to production;

4.support rfq/rfi per sales and fae requests;

5.train/coach/mentor junior technical guys in project development;

6.support innovation initiatives and involve to research and platform project.

job requirements:

1.bachelor degree or above, major in power electronics or related;

2.expertise in psu electronic design including topology, control, key component selection, calculation and simulation, design verification, cost control, dfx, safety etc.;

3.familiar with power design simulation cad tools. strong individual contributor to drive for project success independently;

4.6+ years in power design experience.

第4篇 通信電源設計工程師崗位職責

職位描述/要求:

1、本科以上學歷,通信工程相關專業;

2、2-3年通信電源配套設計或工程實施等相關工作經驗,郵電設計院從業人員優先考慮;

3、熟練應用cad制圖、office軟件;

4、具有良好的職業精神,溝通能力和團隊合作精神好。

第5篇 開關電源設計工程師崗位職責

本公司招開關電源適配器開發設計工程師2名,22-45周歲,需熟悉電子開關電源和電源適配器的國際安規認證和6級能效標準要求,且有獨立開發、設計、制作電子開關電源適配器的實際經驗和申請安規認證的能力,待遇可面議。歡迎來廠面談!

電源設計工程師崗位職責(五篇)

電源設計工程師 1.負責筆記本電腦的電源回路設計;2.根據產品設計要求,設計相應的電源解決方案;3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;4.制定合理的
推薦度:
點擊下載文檔文檔為doc格式

推薦專題

相關電源設計信息

  • 電源設計工程師崗位職責(五篇)
  • 電源設計工程師崗位職責(五篇)96人關注

    電源設計工程師 1.負責筆記本電腦的電源回路設計;2.根據產品設計要求,設計相應的電源解決方案;3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;4. ...[更多]

  • 電源設計工程師崗位職責(11篇范文)
  • 電源設計工程師崗位職責(11篇范文)82人關注

    電源設計工程師 1.負責筆記本電腦的電源回路設計;2.根據產品設計要求,設計相應的電源解決方案;3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;4. ...[更多]

  • 電源設計工程師崗位職責(5篇范文)
  • 電源設計工程師崗位職責(5篇范文)59人關注

    電源設計工程師 1.負責筆記本電腦的電源回路設計;2.根據產品設計要求,設計相應的電源解決方案;3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;4. ...[更多]

  • 通信電源設計工程師崗位職責(2篇范文)
  • 通信電源設計工程師崗位職責(2篇范文)47人關注

    職位描述/要求:1、本科以上學歷,通信工程相關專業;2、2-3年通信電源配套設計或工程實施等相關工作經驗,郵電設計院從業人員優先考慮;3、熟練應用cad制圖、office ...[更多]

  • 電源設計工程師崗位職責(九篇)
  • 電源設計工程師崗位職責(九篇)16人關注

    電源設計工程師 1.負責筆記本電腦的電源回路設計;2.根據產品設計要求,設計相應的電源解決方案;3.根據技術標準及產品設計要求,確認電源回路設計測試項目及基準;4. ...[更多]